<div dir="ltr">I recently began working in a lab that uses a dense-array cap and average referencing. I typically work with a smaller number of electrodes and use mastoid referencing, so this is a bit new to me. I know I should be removing bad channels before re-referencing to the average in order to avoid noise propagating to other channels, but I'm not sure how stringent to be. Clearly I would remove channels recorded from electrodes with a consistently bad connection, but what about channels that show slight 60 Hz interference, or channels that were poorly connected for the first 20% of the trials, but were then fixed and look fine for the rest of the task? Any advice would be much appreciated.</div>