[Eeglablist] Error message on

[James Lawrence]

Thank you both for your input.  How would I get in touch with Arno, Makoto or Christian?

James


James Le Marchant Lawrence Ph.D.

Assistant Professor of Biology


[HPU Logo]

________________________________
From: Cedric Cannard <ccannard at protonmail.com>
Sent: Friday, October 28, 2022 6:45 AM
To: Velu Prabhakar Kumaravel <velu.kumaravel at unitn.it>
Cc: James Lawrence <jlawrence at hpu.edu>; EEGLAB List <eeglablist at sccn.ucsd.edu>; Arnaud Delorme <arnodelorme at gmail.com>; Makoto Miyakoshi <mmiyakoshi at ucsd.edu>
Subject: Re: [Eeglablist] Error message on

[CAUTION: External Sender]


It's definitely not the plugin because I use it on data with 256 Hz sample rate all the time.
It's because you don't have Matlab signal processing toolbox!

Not sure what the code does in this case, sorry. Maybe Arno, Makoto, or Christian can help?

Cedric


------- Original Message -------
On Friday, October 28th, 2022 at 7:24 AM, Velu Prabhakar Kumaravel <velu.kumaravel at unitn.it> wrote:

I have used ASR on data collected with 256 Hz. I also verified the code in GitHub<https://urldefense.com/v3/__https://github.com/sccn/clean_rawdata/blob/master/asr_calibrate.m*L146__;Iw!!Mih3wA!EMCpAkQSmmLtPfC8GKNpN1UoMadwUOXxvEXqXGbHov5vq6Z0HMRIPII_Rmue0MBzjKESTpANUE6NP99_IfcVq1uO$  >, which has a case for 256 Hz. My best bet is that there's some issue with the toolbox license.

To confirm it is a license issue, please type "which yulewalk" in the command window. If it says 'yulewalk' not found, you'd have to install the Signal Processing toolbox.

Best,

Velu

On Thu, Oct 27, 2022, 23:08 Cedric Cannard via eeglablist <eeglablist at sccn.ucsd.edu<mailto:eeglablist at sccn.ucsd.edu>> wrote:
Dear James,

Never seen this message before. Sounds like it's either your sample rate that might be unstable (try to downsample to 200 hz see if that fixes it), or if you didn't highpass-filter your signal. Either check the box in clean_rawdata (top of the window), or Tools > filter > type 1 in the lower edge box.

If that doesn't do it, maybe someone knows more about this problem and can help.

Cedric



------- Original Message -------
On Wednesday, October 26th, 2022 at 5:57 PM, James Lawrence <jlawrence at hpu.edu<mailto:jlawrence at hpu.edu>> wrote:


> Aloha
>
> I am very new to using EEGLab and ran the "Reject data using Clean Rawdata and ASR" function and received the following error message.
>
> "The yulewalk() function was not found and there is no pre-computed spectral filter for your sampling rate. If you would like to use the default spectral filter please try to resample to one of the supported rates (110, 128, 200, 256, 300, 500, 512) or get the appropriate toobox license (you can also disable the spectral weighting feature or supply your own precalculated IIR filter coefficients).,
>
> This is not a bug (Error occurred in function asr_calibrate() at line 155)"
>
> I used a g.tec device to capture the data which sampled at 250Hz. What should I do?
>
>
> James Le Marchant Lawrence Ph.D.
>
> Assistant Professor of Biology
>
>
> [HPU Logo]
> _______________________________________________
> Eeglablist page: http://sccn.ucsd.edu/eeglab/eeglabmail.html
> To unsubscribe, send an empty email to eeglablist-unsubscribe at sccn.ucsd.edu<mailto:eeglablist-unsubscribe at sccn.ucsd.edu>
> For digest mode, send an email with the subject "set digest mime" to eeglablist-request at sccn.ucsd.edu<mailto:eeglablist-request at sccn.ucsd.edu>
_______________________________________________
Eeglablist page: http://sccn.ucsd.edu/eeglab/eeglabmail.html
To unsubscribe, send an empty email to eeglablist-unsubscribe at sccn.ucsd.edu<mailto:eeglablist-unsubscribe at sccn.ucsd.edu>
For digest mode, send an email with the subject "set digest mime" to eeglablist-request at sccn.ucsd.edu<mailto:eeglablist-request at sccn.ucsd.edu>