[Eeglablist] eeglablist Digest, Vol 120, Issue 26
Nick Wan
nickwan at aggiemail.usu.edu
Thu Oct 23 09:35:54 PDT 2014
Hi Eric,
To go off of what David said, I would also suggest to "paste" the analysis
and use the following syntax in order to get your pairwise comparisons:
Say your comparisons were group x ROI x task, and you've selected to view
estimated marginal means, you should see something like
/EMMEANS=TABLES(Group*ROI*task)
I would replace that syntax with
/EMMEANS=TABLES(Group*ROI*task) COMPARE(Group) ADJ(LSD)
/EMMEANS=TABLES(Group*ROI*task) COMPARE(ROI) ADJ(LSD)
/EMMEANS=TABLES(Group*ROI*task) COMPARE(task) ADJ(LSD)
Hope that helps!
--
From: David Ryan <ryand1 at goldmail.etsu.edu>
To: Eric HG <erichg2013 at gmail.com>
Cc: eeglablist <eeglablist at sccn.ucsd.edu>
Date: Wed, 22 Oct 2014 12:48:39 -0400
Subject: Re: [Eeglablist] Question about EEG statistics
Hello Eric,
It would be more appropriate to use a repeated measures ANOVA. Are you
using SPSS? If so, I would use GLM -> repeated measures, with each
condition as a factor with two levels (pre, post).
Good Luck,
Dave
On Tue, Oct 21, 2014 at 4:46 PM, Eric HG <erichg2013 at gmail.com> wrote:
> Dear list,
>
> If you have a 3x2 within subject design (3 conditions and 2 groups (pre
> and post) - each participant come in three times and EEG was recorded pre
> and post).
>
> Is it possible to use a t-test for each condition (pre vs post)? And then
> be able to say something about the changes during each condition? Or is it
> more appropriate to use a within subject ANOVA?
>
> Thank you,
>
> Eric
>
> _______________________________________________
> Eeglablist page: http://sccn.ucsd.edu/eeglab/eeglabmail.html
> To unsubscribe, send an empty email to
> eeglablist-unsubscribe at sccn.ucsd.edu
> For digest mode, send an email with the subject "set digest mime" to
> eeglablist-request at sccn.ucsd.edu
On Thu, Oct 23, 2014 at 6:58 AM, <eeglablist-request at sccn.ucsd.edu> wrote:
> Send eeglablist mailing list submissions to
> eeglablist at sccn.ucsd.edu
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://sccn.ucsd.edu/mailman/listinfo/eeglablist
> or, via email, send a message with subject or body 'help' to
> eeglablist-request at sccn.ucsd.edu
>
> You can reach the person managing the list at
> eeglablist-owner at sccn.ucsd.edu
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of eeglablist digest..."
>
> Today's Topics:
>
> 1. Re: Question about EEG statistics (David Ryan)
> 2. EEGLAB doesn't start on latest matlab and OS X (Martin Dinov)
> 3. Re: EEGLAB doesn't start on latest matlab and OS X
> (Ram?n Martinez)
> 4. Re: EEGLAB doesn't start on latest matlab and OS X
> (Simon-Shlomo Poil)
> 5. Re: EEGLAB doesn't start on latest matlab and OS X
> (Simon-Shlomo Poil)
> 6. Re: EEGLAB doesn't start on latest matlab and OS X
> (Ram?n Martinez)
> 7. Question about EEG statistics (Dr Cyril Pernet)
> 8. Re: EEGLAB doesn't start on latest matlab and OS X
> (Solveig Hauger)
> 9. Re: EEGLAB doesn't start on latest matlab and OS X
> (Simon-Shlomo Poil)
> 10. Re: EEGLAB doesn't start on latest matlab and OS X (Trunk Attila)
> 11. Re: EEGLAB doesn't start on latest matlab and OS X (Martin Dinov)
>
>
> ---------- Forwarded message ----------
> From: David Ryan <ryand1 at goldmail.etsu.edu>
> To: Eric HG <erichg2013 at gmail.com>
> Cc: eeglablist <eeglablist at sccn.ucsd.edu>
> Date: Wed, 22 Oct 2014 12:48:39 -0400
> Subject: Re: [Eeglablist] Question about EEG statistics
> Hello Eric,
> It would be more appropriate to use a repeated measures ANOVA. Are you
> using SPSS? If so, I would use GLM -> repeated measures, with each
> condition as a factor with two levels (pre, post).
>
> Good Luck,
> Dave
>
> On Tue, Oct 21, 2014 at 4:46 PM, Eric HG <erichg2013 at gmail.com> wrote:
>
>> Dear list,
>>
>> If you have a 3x2 within subject design (3 conditions and 2 groups (pre
>> and post) - each participant come in three times and EEG was recorded pre
>> and post).
>>
>> Is it possible to use a t-test for each condition (pre vs post)? And then
>> be able to say something about the changes during each condition? Or is it
>> more appropriate to use a within subject ANOVA?
>>
>> Thank you,
>>
>> Eric
>>
>> _______________________________________________
>> Eeglablist page: http://sccn.ucsd.edu/eeglab/eeglabmail.html
>> To unsubscribe, send an empty email to
>> eeglablist-unsubscribe at sccn.ucsd.edu
>> For digest mode, send an email with the subject "set digest mime" to
>> eeglablist-request at sccn.ucsd.edu
>>
>
>
>
> --
> David Ryan M.A.
> Doctoral Candidate, Experimental Psychology
> Brain-Computer Interface Laboratory
> East Tennessee State University
> Laboratory*:* 423.439.6924
> Website: http://www.etsu.edu/cas/bcilab
>
>
> ---------- Forwarded message ----------
> From: Martin Dinov <m.dinov13 at imperial.ac.uk>
> To: eeglablist at sccn.ucsd.edu
> Cc:
> Date: Wed, 22 Oct 2014 16:45:53 +0100
> Subject: [Eeglablist] EEGLAB doesn't start on latest matlab and OS X
> Dear all,
>
> I recently upgraded my OS X machine to the latest 10.10 Yosemite
> version. Now, with the latest (?) MATLAB (R2014b) and with
> eeglab13_3_2b, calling "eeglab" in MATLAB does not successfully start
> EEGLAB. I get the following error messages:
>
> >> eeglab
> eeglab: options file is ~/eeg_options.m
> Error using supergui (line 140)
> supergui error: argument 'fig' must be numeric
>
> Error in eeglab>eeg_mainfig (line 1304)
> supergui(gcf, geometry, [], listui{:});
>
> Error in eeglab (line 449)
> javaobj = eeg_mainfig(onearg);
>
> Has anyone successfully gotten eeglab to run on this combination of OS X
> and MATLAB versions?
>
> Kind regards,
>
> --
> Martin Dinov, MSc
> PhD postgraduate
> Imperial College London
> Computational, Cognitive and Clinical Neuroimaging Laboratory
> 3rd Floor, Burlington Danes Building,
> Hammersmith Hospital
> Du Cane Road
> London
> W12 0NN
>
>
>
>
> ---------- Forwarded message ----------
> From: "Ramón Martinez" <nucleuscub at gmail.com>
> To: Martin Dinov <m.dinov13 at imperial.ac.uk>
> Cc: EEGLAB List <eeglablist at sccn.ucsd.edu>
> Date: Wed, 22 Oct 2014 23:51:31 +0200
> Subject: Re: [Eeglablist] EEGLAB doesn't start on latest matlab and OS X
> Dear Martin,
> The problem is with the last distribution of MATLAB (2014b). We are
> working on it and a new release will be issued as soon as possible.
> Thanks,
> Ramon
>
>
> On Wed, Oct 22, 2014 at 5:45 PM, Martin Dinov <m.dinov13 at imperial.ac.uk>
> wrote:
>
>> Dear all,
>>
>> I recently upgraded my OS X machine to the latest 10.10 Yosemite
>> version. Now, with the latest (?) MATLAB (R2014b) and with
>> eeglab13_3_2b, calling "eeglab" in MATLAB does not successfully start
>> EEGLAB. I get the following error messages:
>>
>> >> eeglab
>> eeglab: options file is ~/eeg_options.m
>> Error using supergui (line 140)
>> supergui error: argument 'fig' must be numeric
>>
>> Error in eeglab>eeg_mainfig (line 1304)
>> supergui(gcf, geometry, [], listui{:});
>>
>> Error in eeglab (line 449)
>> javaobj = eeg_mainfig(onearg);
>>
>> Has anyone successfully gotten eeglab to run on this combination of OS X
>> and MATLAB versions?
>>
>> Kind regards,
>>
>> --
>> Martin Dinov, MSc
>> PhD postgraduate
>> Imperial College London
>> Computational, Cognitive and Clinical Neuroimaging Laboratory
>> 3rd Floor, Burlington Danes Building,
>> Hammersmith Hospital
>> Du Cane Road
>> London
>> W12 0NN
>>
>> _______________________________________________
>> Eeglablist page: http://sccn.ucsd.edu/eeglab/eeglabmail.html
>> To unsubscribe, send an empty email to
>> eeglablist-unsubscribe at sccn.ucsd.edu
>> For digest mode, send an email with the subject "set digest mime" to
>> eeglablist-request at sccn.ucsd.edu
>>
>
>
>
> --
> _____________________________________________________
> Ramon Martinez-Cancino
> Swartz Center for Computational Neuroscience
> Institute for Neural Computation, University of California San Diego
>
>
> ---------- Forwarded message ----------
> From: Simon-Shlomo Poil <poil.simonshlomo at gmail.com>
> To: Martin Dinov <m.dinov13 at imperial.ac.uk>
> Cc: "eeglablist at sccn.ucsd.edu" <eeglablist at sccn.ucsd.edu>
> Date: Thu, 23 Oct 2014 00:10:30 +0200
> Subject: Re: [Eeglablist] EEGLAB doesn't start on latest matlab and OS X
> Dear Martin,
>
> This is an issue associated with the new graphics structures in Matlab
> R2014b. You simply need to change line 126 to 'fig' '' [] 0;
> instead of
> 'fig' 'real' [] 0;
>
> and then at least the eeglab gui starts.
>
> Best wishes,
>
> --
> Simon-Shlomo Poil, Dr.
> LinkedIn profile: http://ch.linkedin.com/in/simonshlomopoil/
>
> The Neurophysiological Biomarker Toolbox (NBT): http://www.nbtwiki.net
>
> My latest publications:
> Integrative EEG biomarkers predict progression to Alzheimer's disease at
> the MCI stage: http://l.nbtwiki.net/19jMuy8
>
> The Amsterdam Resting-State Questionnaire reveals multiple phenotypes of
> resting-state cognition: http://l.nbtwiki.net/17yblK7
>
>
> 2014-10-22 17:45 GMT+02:00 Martin Dinov <m.dinov13 at imperial.ac.uk>:
>
>> Dear all,
>>
>> I recently upgraded my OS X machine to the latest 10.10 Yosemite
>> version. Now, with the latest (?) MATLAB (R2014b) and with
>> eeglab13_3_2b, calling "eeglab" in MATLAB does not successfully start
>> EEGLAB. I get the following error messages:
>>
>> >> eeglab
>> eeglab: options file is ~/eeg_options.m
>> Error using supergui (line 140)
>> supergui error: argument 'fig' must be numeric
>>
>> Error in eeglab>eeg_mainfig (line 1304)
>> supergui(gcf, geometry, [], listui{:});
>>
>> Error in eeglab (line 449)
>> javaobj = eeg_mainfig(onearg);
>>
>> Has anyone successfully gotten eeglab to run on this combination of OS X
>> and MATLAB versions?
>>
>> Kind regards,
>>
>> --
>> Martin Dinov, MSc
>> PhD postgraduate
>> Imperial College London
>> Computational, Cognitive and Clinical Neuroimaging Laboratory
>> 3rd Floor, Burlington Danes Building,
>> Hammersmith Hospital
>> Du Cane Road
>> London
>> W12 0NN
>>
>> _______________________________________________
>> Eeglablist page: http://sccn.ucsd.edu/eeglab/eeglabmail.html
>> To unsubscribe, send an empty email to
>> eeglablist-unsubscribe at sccn.ucsd.edu
>> For digest mode, send an email with the subject "set digest mime" to
>> eeglablist-request at sccn.ucsd.edu
>>
>
>
>
> ---------- Forwarded message ----------
> From: Simon-Shlomo Poil <poil.simonshlomo at gmail.com>
> To: "Ramón Martinez" <nucleuscub at gmail.com>
> Cc: "eeglablist at sccn.ucsd.edu" <eeglablist at sccn.ucsd.edu>
> Date: Thu, 23 Oct 2014 00:32:39 +0200
> Subject: Re: [Eeglablist] EEGLAB doesn't start on latest matlab and OS X
> Dear Ramon,
>
> I agree. However, the issue is that the latest version of Mac OS only
> supports Matlab R2014b. Maybe there is some trick to get R2014a to work, at
> the moment I get the message "You can’t open the application
> “MATLAB_R2014a” because it is not supported on this type of Mac."
>
> Simon
>
>
>
> 2014-10-23 0:26 GMT+02:00 Ramón Martinez <nucleuscub at gmail.com>:
>
>> Hi again.... Simon.. as you well said.. that 'at least' allow to start
>> EEGLAB, but there are more issues associated with the change of the handles
>> from structures to objects, with the change of the default order of the
>> colors in the plots, etc ... so... I think would be a good idea if we stay
>> with the previous version of Matlab until we fix all the issues... at least
>> to use EEGLAB.
>> Best,
>> Ramon
>>
>>
>>
>> On Thu, Oct 23, 2014 at 12:10 AM, Simon-Shlomo Poil <
>> poil.simonshlomo at gmail.com> wrote:
>>
>>> Dear Martin,
>>>
>>> This is an issue associated with the new graphics structures in Matlab
>>> R2014b. You simply need to change line 126 to 'fig' '' [] 0;
>>> instead of
>>> 'fig' 'real' [] 0;
>>>
>>> and then at least the eeglab gui starts.
>>>
>>> Best wishes,
>>>
>>> --
>>> Simon-Shlomo Poil, Dr.
>>> LinkedIn profile: http://ch.linkedin.com/in/simonshlomopoil/
>>>
>>> The Neurophysiological Biomarker Toolbox (NBT): http://www.nbtwiki.net
>>>
>>> My latest publications:
>>> Integrative EEG biomarkers predict progression to Alzheimer's disease at
>>> the MCI stage: http://l.nbtwiki.net/19jMuy8
>>>
>>> The Amsterdam Resting-State Questionnaire reveals multiple phenotypes of
>>> resting-state cognition: http://l.nbtwiki.net/17yblK7
>>>
>>>
>>> 2014-10-22 17:45 GMT+02:00 Martin Dinov <m.dinov13 at imperial.ac.uk>:
>>>
>>>> Dear all,
>>>>
>>>> I recently upgraded my OS X machine to the latest 10.10 Yosemite
>>>> version. Now, with the latest (?) MATLAB (R2014b) and with
>>>> eeglab13_3_2b, calling "eeglab" in MATLAB does not successfully start
>>>> EEGLAB. I get the following error messages:
>>>>
>>>> >> eeglab
>>>> eeglab: options file is ~/eeg_options.m
>>>> Error using supergui (line 140)
>>>> supergui error: argument 'fig' must be numeric
>>>>
>>>> Error in eeglab>eeg_mainfig (line 1304)
>>>> supergui(gcf, geometry, [], listui{:});
>>>>
>>>> Error in eeglab (line 449)
>>>> javaobj = eeg_mainfig(onearg);
>>>>
>>>> Has anyone successfully gotten eeglab to run on this combination of OS X
>>>> and MATLAB versions?
>>>>
>>>> Kind regards,
>>>>
>>>> --
>>>> Martin Dinov, MSc
>>>> PhD postgraduate
>>>> Imperial College London
>>>> Computational, Cognitive and Clinical Neuroimaging Laboratory
>>>> 3rd Floor, Burlington Danes Building,
>>>> Hammersmith Hospital
>>>> Du Cane Road
>>>> London
>>>> W12 0NN
>>>>
>>>> _______________________________________________
>>>> Eeglablist page: http://sccn.ucsd.edu/eeglab/eeglabmail.html
>>>> To unsubscribe, send an empty email to
>>>> eeglablist-unsubscribe at sccn.ucsd.edu
>>>> For digest mode, send an email with the subject "set digest mime" to
>>>> eeglablist-request at sccn.ucsd.edu
>>>>
>>>
>>>
>>> _______________________________________________
>>> Eeglablist page: http://sccn.ucsd.edu/eeglab/eeglabmail.html
>>> To unsubscribe, send an empty email to
>>> eeglablist-unsubscribe at sccn.ucsd.edu
>>> For digest mode, send an email with the subject "set digest mime" to
>>> eeglablist-request at sccn.ucsd.edu
>>>
>>
>>
>>
>> --
>> _____________________________________________________
>> Ramon Martinez-Cancino
>> Swartz Center for Computational Neuroscience
>> Institute for Neural Computation, University of California San Diego
>>
>
>
>
> ---------- Forwarded message ----------
> From: "Ramón Martinez" <nucleuscub at gmail.com>
> To: Simon-Shlomo Poil <poil.simonshlomo at gmail.com>
> Cc: "eeglablist at sccn.ucsd.edu" <eeglablist at sccn.ucsd.edu>
> Date: Thu, 23 Oct 2014 00:26:48 +0200
> Subject: Re: [Eeglablist] EEGLAB doesn't start on latest matlab and OS X
> Hi again.... Simon.. as you well said.. that 'at least' allow to start
> EEGLAB, but there are more issues associated with the change of the handles
> from structures to objects, with the change of the default order of the
> colors in the plots, etc ... so... I think would be a good idea if we stay
> with the previous version of Matlab until we fix all the issues... at least
> to use EEGLAB.
> Best,
> Ramon
>
>
>
> On Thu, Oct 23, 2014 at 12:10 AM, Simon-Shlomo Poil <
> poil.simonshlomo at gmail.com> wrote:
>
>> Dear Martin,
>>
>> This is an issue associated with the new graphics structures in Matlab
>> R2014b. You simply need to change line 126 to 'fig' '' [] 0;
>> instead of
>> 'fig' 'real' [] 0;
>>
>> and then at least the eeglab gui starts.
>>
>> Best wishes,
>>
>> --
>> Simon-Shlomo Poil, Dr.
>> LinkedIn profile: http://ch.linkedin.com/in/simonshlomopoil/
>>
>> The Neurophysiological Biomarker Toolbox (NBT): http://www.nbtwiki.net
>>
>> My latest publications:
>> Integrative EEG biomarkers predict progression to Alzheimer's disease at
>> the MCI stage: http://l.nbtwiki.net/19jMuy8
>>
>> The Amsterdam Resting-State Questionnaire reveals multiple phenotypes of
>> resting-state cognition: http://l.nbtwiki.net/17yblK7
>>
>>
>> 2014-10-22 17:45 GMT+02:00 Martin Dinov <m.dinov13 at imperial.ac.uk>:
>>
>>> Dear all,
>>>
>>> I recently upgraded my OS X machine to the latest 10.10 Yosemite
>>> version. Now, with the latest (?) MATLAB (R2014b) and with
>>> eeglab13_3_2b, calling "eeglab" in MATLAB does not successfully start
>>> EEGLAB. I get the following error messages:
>>>
>>> >> eeglab
>>> eeglab: options file is ~/eeg_options.m
>>> Error using supergui (line 140)
>>> supergui error: argument 'fig' must be numeric
>>>
>>> Error in eeglab>eeg_mainfig (line 1304)
>>> supergui(gcf, geometry, [], listui{:});
>>>
>>> Error in eeglab (line 449)
>>> javaobj = eeg_mainfig(onearg);
>>>
>>> Has anyone successfully gotten eeglab to run on this combination of OS X
>>> and MATLAB versions?
>>>
>>> Kind regards,
>>>
>>> --
>>> Martin Dinov, MSc
>>> PhD postgraduate
>>> Imperial College London
>>> Computational, Cognitive and Clinical Neuroimaging Laboratory
>>> 3rd Floor, Burlington Danes Building,
>>> Hammersmith Hospital
>>> Du Cane Road
>>> London
>>> W12 0NN
>>>
>>> _______________________________________________
>>> Eeglablist page: http://sccn.ucsd.edu/eeglab/eeglabmail.html
>>> To unsubscribe, send an empty email to
>>> eeglablist-unsubscribe at sccn.ucsd.edu
>>> For digest mode, send an email with the subject "set digest mime" to
>>> eeglablist-request at sccn.ucsd.edu
>>>
>>
>>
>> _______________________________________________
>> Eeglablist page: http://sccn.ucsd.edu/eeglab/eeglabmail.html
>> To unsubscribe, send an empty email to
>> eeglablist-unsubscribe at sccn.ucsd.edu
>> For digest mode, send an email with the subject "set digest mime" to
>> eeglablist-request at sccn.ucsd.edu
>>
>
>
>
> --
> _____________________________________________________
> Ramon Martinez-Cancino
> Swartz Center for Computational Neuroscience
> Institute for Neural Computation, University of California San Diego
>
>
> ---------- Forwarded message ----------
> From: Dr Cyril Pernet <cyril.pernet at ed.ac.uk>
> To: eeglablist at sccn.ucsd.edu
> Cc:
> Date: Wed, 22 Oct 2014 23:24:41 +0100
> Subject: [Eeglablist] Question about EEG statistics
> Eric
>
> > If you have a 3x2 within subject design (3 conditions and 2 groups (pre
> and post) - each participant come in three times and EEG was recorded pre
> and post).
> > Is it possible to use a t-test for each condition (pre vs post)? And
> then be able to say something about the changes during each condition? Or
> is it more appropriate to use a within subject ANOVA?
>
> By definition you want to do an ANOVA - this can be performed easily using
> the LIMO EEG toolbox
> Now if this is pre-post intervension, this is not groups but repeated
> measures - again the toolbox can do either a repeated measure on the
> difference or the full 2*3 model
>
> best
> cyril
>
>
> >
>
> --
> Dr Cyril Pernet,
> Centre for Clinical Brain Sciences (CCBS)
> Neuroimaging Sciences
>
> The University of Edinburgh
> Chancellor's Building
> Room GU426D
> 49 Little France Crescent
> Edinburgh EH16 4SB
>
> cyril.pernet at ed.ac.uk
> tel: 0131 465 9530
> http://www.sbirc.ed.ac.uk/cyril
> http://www.ed.ac.uk/edinburgh-imaging
>
>
> --
> The University of Edinburgh is a charitable body, registered in
> Scotland, with registration number SC005336.
>
>
> ---------- Forwarded message ----------
> From: Solveig Hauger <solveig.hauger at gmail.com>
> To: Simon-Shlomo Poil <poil.simonshlomo at gmail.com>
> Cc: "eeglablist at sccn.ucsd.edu" <eeglablist at sccn.ucsd.edu>
> Date: Thu, 23 Oct 2014 08:43:00 +0200
> Subject: Re: [Eeglablist] EEGLAB doesn't start on latest matlab and OS X
> I had a similar issue when upgrading to the latest Mac Os version, and it
> didn`t allow any previous versions of Matlab R2014b to run. However, I
> contacted Matlab support, and received an "unauthorised" patch to work
> around the issue. Now I am able to run Matlab R2013 on the latest Mac OS.
>
>
>
> 2014-10-23 0:32 GMT+02:00 Simon-Shlomo Poil <poil.simonshlomo at gmail.com>:
>
>> Dear Ramon,
>>
>> I agree. However, the issue is that the latest version of Mac OS only
>> supports Matlab R2014b. Maybe there is some trick to get R2014a to work, at
>> the moment I get the message "You can’t open the application
>> “MATLAB_R2014a” because it is not supported on this type of Mac."
>>
>> Simon
>>
>>
>>
>>
>> 2014-10-23 0:26 GMT+02:00 Ramón Martinez <nucleuscub at gmail.com>:
>>
>>> Hi again.... Simon.. as you well said.. that 'at least' allow to start
>>> EEGLAB, but there are more issues associated with the change of the handles
>>> from structures to objects, with the change of the default order of the
>>> colors in the plots, etc ... so... I think would be a good idea if we stay
>>> with the previous version of Matlab until we fix all the issues... at least
>>> to use EEGLAB.
>>> Best,
>>> Ramon
>>>
>>>
>>>
>>> On Thu, Oct 23, 2014 at 12:10 AM, Simon-Shlomo Poil <
>>> poil.simonshlomo at gmail.com> wrote:
>>>
>>>> Dear Martin,
>>>>
>>>> This is an issue associated with the new graphics structures in Matlab
>>>> R2014b. You simply need to change line 126 to 'fig' '' [] 0;
>>>> instead of
>>>> 'fig' 'real' [] 0;
>>>>
>>>> and then at least the eeglab gui starts.
>>>>
>>>> Best wishes,
>>>>
>>>> --
>>>> Simon-Shlomo Poil, Dr.
>>>> LinkedIn profile: http://ch.linkedin.com/in/simonshlomopoil/
>>>>
>>>> The Neurophysiological Biomarker Toolbox (NBT): http://www.nbtwiki.net
>>>>
>>>> My latest publications:
>>>> Integrative EEG biomarkers predict progression to Alzheimer's disease
>>>> at the MCI stage: http://l.nbtwiki.net/19jMuy8
>>>>
>>>> The Amsterdam Resting-State Questionnaire reveals multiple phenotypes
>>>> of resting-state cognition: http://l.nbtwiki.net/17yblK7
>>>>
>>>>
>>>> 2014-10-22 17:45 GMT+02:00 Martin Dinov <m.dinov13 at imperial.ac.uk>:
>>>>
>>>>> Dear all,
>>>>>
>>>>> I recently upgraded my OS X machine to the latest 10.10 Yosemite
>>>>> version. Now, with the latest (?) MATLAB (R2014b) and with
>>>>> eeglab13_3_2b, calling "eeglab" in MATLAB does not successfully start
>>>>> EEGLAB. I get the following error messages:
>>>>>
>>>>> >> eeglab
>>>>> eeglab: options file is ~/eeg_options.m
>>>>> Error using supergui (line 140)
>>>>> supergui error: argument 'fig' must be numeric
>>>>>
>>>>> Error in eeglab>eeg_mainfig (line 1304)
>>>>> supergui(gcf, geometry, [], listui{:});
>>>>>
>>>>> Error in eeglab (line 449)
>>>>> javaobj = eeg_mainfig(onearg);
>>>>>
>>>>> Has anyone successfully gotten eeglab to run on this combination of OS
>>>>> X
>>>>> and MATLAB versions?
>>>>>
>>>>> Kind regards,
>>>>>
>>>>> --
>>>>> Martin Dinov, MSc
>>>>> PhD postgraduate
>>>>> Imperial College London
>>>>> Computational, Cognitive and Clinical Neuroimaging Laboratory
>>>>> 3rd Floor, Burlington Danes Building,
>>>>> Hammersmith Hospital
>>>>> Du Cane Road
>>>>> London
>>>>> W12 0NN
>>>>>
>>>>> _______________________________________________
>>>>> Eeglablist page: http://sccn.ucsd.edu/eeglab/eeglabmail.html
>>>>> To unsubscribe, send an empty email to
>>>>> eeglablist-unsubscribe at sccn.ucsd.edu
>>>>> For digest mode, send an email with the subject "set digest mime" to
>>>>> eeglablist-request at sccn.ucsd.edu
>>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> Eeglablist page: http://sccn.ucsd.edu/eeglab/eeglabmail.html
>>>> To unsubscribe, send an empty email to
>>>> eeglablist-unsubscribe at sccn.ucsd.edu
>>>> For digest mode, send an email with the subject "set digest mime" to
>>>> eeglablist-request at sccn.ucsd.edu
>>>>
>>>
>>>
>>>
>>> --
>>> _____________________________________________________
>>> Ramon Martinez-Cancino
>>> Swartz Center for Computational Neuroscience
>>> Institute for Neural Computation, University of California San Diego
>>>
>>
>>
>> _______________________________________________
>> Eeglablist page: http://sccn.ucsd.edu/eeglab/eeglabmail.html
>> To unsubscribe, send an empty email to
>> eeglablist-unsubscribe at sccn.ucsd.edu
>> For digest mode, send an email with the subject "set digest mime" to
>> eeglablist-request at sccn.ucsd.edu
>>
>
>
>
> --
> Best
> Solveig L. Hauger
> psychologist/PhD. candidate, Sunnaas rehabilitation hospital
>
>
>
> ---------- Forwarded message ----------
> From: Simon-Shlomo Poil <poil.simonshlomo at gmail.com>
> To: Trunk Attila <tyuki at gamma.ttk.pte.hu>
> Cc: "eeglablist at sccn.ucsd.edu" <eeglablist at sccn.ucsd.edu>
> Date: Thu, 23 Oct 2014 12:58:59 +0200
> Subject: Re: [Eeglablist] EEGLAB doesn't start on latest matlab and OS X
> Hi Ramon,
>
> How far are you with the next version of EEGLAB solving these R2014b
> issues? Are most bugs already fixed in the SVN version?
>
> I just tried to use the plot function, pop_eegplot ; and bump into
> multiple bugs related to the new graphics. (on 13.0.3.2b).
>
> Would be happy to help out.
>
> Simon
>
>
> 2014-10-23 12:53 GMT+02:00 Trunk Attila <tyuki at gamma.ttk.pte.hu>:
>
>> Hey, i had a similar issue when upgraded my Mac to OSX 10.10, but a
>> Matlab's patch solved it. Now Matlab 2013a works well on my Mac.
>> http://www.mathworks.com/support/bugreports/1098655
>>
>>
>> > On 23 Oct 2014, at 08:43 , Solveig Hauger <solveig.hauger at gmail.com>
>> wrote:
>> >
>> > I had a similar issue when upgrading to the latest Mac Os version, and
>> it didn`t allow any previous versions of Matlab R2014b to run. However, I
>> contacted Matlab support, and received an "unauthorised" patch to work
>> around the issue. Now I am able to run Matlab R2013 on the latest Mac OS.
>> >
>> >
>> >
>> > 2014-10-23 0:32 GMT+02:00 Simon-Shlomo Poil <poil.simonshlomo at gmail.com
>> >:
>> > Dear Ramon,
>> >
>> > I agree. However, the issue is that the latest version of Mac OS only
>> supports Matlab R2014b. Maybe there is some trick to get R2014a to work, at
>> the moment I get the message "You can’t open the application
>> “MATLAB_R2014a” because it is not supported on this type of Mac."
>> >
>> > Simon
>> >
>> >
>> >
>> >
>> > 2014-10-23 0:26 GMT+02:00 Ramón Martinez <nucleuscub at gmail.com>:
>> > Hi again.... Simon.. as you well said.. that 'at least' allow to start
>> EEGLAB, but there are more issues associated with the change of the
>> handles from structures to objects, with the change of the default order
>> of the colors in the plots, etc ... so... I think would be a good idea if
>> we stay with the previous version of Matlab until we fix all the issues...
>> at least to use EEGLAB.
>> > Best,
>> > Ramon
>> >
>> >
>> >
>> > On Thu, Oct 23, 2014 at 12:10 AM, Simon-Shlomo Poil <
>> poil.simonshlomo at gmail.com> wrote:
>> > Dear Martin,
>> >
>> > This is an issue associated with the new graphics structures in Matlab
>> R2014b. You simply need to change line 126 to 'fig' '' [] 0;
>> > instead of
>> > 'fig' 'real' [] 0;
>> >
>> > and then at least the eeglab gui starts.
>> >
>> > Best wishes,
>> >
>> > --
>> > Simon-Shlomo Poil, Dr.
>> > LinkedIn profile: http://ch.linkedin.com/in/simonshlomopoil/
>> >
>> > The Neurophysiological Biomarker Toolbox (NBT): http://www.nbtwiki.net
>> >
>> > My latest publications:
>> > Integrative EEG biomarkers predict progression to Alzheimer's disease
>> at the MCI stage: http://l.nbtwiki.net/19jMuy8
>> >
>> > The Amsterdam Resting-State Questionnaire reveals multiple phenotypes
>> of resting-state cognition: http://l.nbtwiki.net/17yblK7
>> >
>> >
>> > 2014-10-22 17:45 GMT+02:00 Martin Dinov <m.dinov13 at imperial.ac.uk>:
>> > Dear all,
>> >
>> > I recently upgraded my OS X machine to the latest 10.10 Yosemite
>> > version. Now, with the latest (?) MATLAB (R2014b) and with
>> > eeglab13_3_2b, calling "eeglab" in MATLAB does not successfully start
>> > EEGLAB. I get the following error messages:
>> >
>> > >> eeglab
>> > eeglab: options file is ~/eeg_options.m
>> > Error using supergui (line 140)
>> > supergui error: argument 'fig' must be numeric
>> >
>> > Error in eeglab>eeg_mainfig (line 1304)
>> > supergui(gcf, geometry, [], listui{:});
>> >
>> > Error in eeglab (line 449)
>> > javaobj = eeg_mainfig(onearg);
>> >
>> > Has anyone successfully gotten eeglab to run on this combination of OS X
>> > and MATLAB versions?
>> >
>> > Kind regards,
>> >
>> > --
>> > Martin Dinov, MSc
>> > PhD postgraduate
>> > Imperial College London
>> > Computational, Cognitive and Clinical Neuroimaging Laboratory
>> > 3rd Floor, Burlington Danes Building,
>> > Hammersmith Hospital
>> > Du Cane Road
>> > London
>> > W12 0NN
>> >
>> > _______________________________________________
>> > Eeglablist page: http://sccn.ucsd.edu/eeglab/eeglabmail.html
>> > To unsubscribe, send an empty email to
>> eeglablist-unsubscribe at sccn.ucsd.edu
>> > For digest mode, send an email with the subject "set digest mime" to
>> eeglablist-request at sccn.ucsd.edu
>> >
>> >
>> > _______________________________________________
>> > Eeglablist page: http://sccn.ucsd.edu/eeglab/eeglabmail.html
>> > To unsubscribe, send an empty email to
>> eeglablist-unsubscribe at sccn.ucsd.edu
>> > For digest mode, send an email with the subject "set digest mime" to
>> eeglablist-request at sccn.ucsd.edu
>> >
>> >
>> >
>> > --
>> > _____________________________________________________
>> > Ramon Martinez-Cancino
>> > Swartz Center for Computational Neuroscience
>> > Institute for Neural Computation, University of California San Diego
>> >
>> >
>> > _______________________________________________
>> > Eeglablist page: http://sccn.ucsd.edu/eeglab/eeglabmail.html
>> > To unsubscribe, send an empty email to
>> eeglablist-unsubscribe at sccn.ucsd.edu
>> > For digest mode, send an email with the subject "set digest mime" to
>> eeglablist-request at sccn.ucsd.edu
>> >
>> >
>> >
>> > --
>> > Best
>> > Solveig L. Hauger
>> > psychologist/PhD. candidate, Sunnaas rehabilitation hospital
>> >
>> > _______________________________________________
>> > Eeglablist page: http://sccn.ucsd.edu/eeglab/eeglabmail.html
>> > To unsubscribe, send an empty email to
>> eeglablist-unsubscribe at sccn.ucsd.edu
>> > For digest mode, send an email with the subject "set digest mime" to
>> eeglablist-request at sccn.ucsd.edu
>>
>>
>
>
> ---------- Forwarded message ----------
> From: Trunk Attila <tyuki at gamma.ttk.pte.hu>
> To: Solveig Hauger <solveig.hauger at gmail.com>
> Cc: "eeglablist at sccn.ucsd.edu" <eeglablist at sccn.ucsd.edu>
> Date: Thu, 23 Oct 2014 12:53:56 +0200
> Subject: Re: [Eeglablist] EEGLAB doesn't start on latest matlab and OS X
> Hey, i had a similar issue when upgraded my Mac to OSX 10.10, but a
> Matlab's patch solved it. Now Matlab 2013a works well on my Mac.
> http://www.mathworks.com/support/bugreports/1098655
>
>
> > On 23 Oct 2014, at 08:43 , Solveig Hauger <solveig.hauger at gmail.com>
> wrote:
> >
> > I had a similar issue when upgrading to the latest Mac Os version, and
> it didn`t allow any previous versions of Matlab R2014b to run. However, I
> contacted Matlab support, and received an "unauthorised" patch to work
> around the issue. Now I am able to run Matlab R2013 on the latest Mac OS.
> >
> >
> >
> > 2014-10-23 0:32 GMT+02:00 Simon-Shlomo Poil <poil.simonshlomo at gmail.com
> >:
> > Dear Ramon,
> >
> > I agree. However, the issue is that the latest version of Mac OS only
> supports Matlab R2014b. Maybe there is some trick to get R2014a to work, at
> the moment I get the message "You can’t open the application
> “MATLAB_R2014a” because it is not supported on this type of Mac."
> >
> > Simon
> >
> >
> >
> >
> > 2014-10-23 0:26 GMT+02:00 Ramón Martinez <nucleuscub at gmail.com>:
> > Hi again.... Simon.. as you well said.. that 'at least' allow to start
> EEGLAB, but there are more issues associated with the change of the
> handles from structures to objects, with the change of the default order
> of the colors in the plots, etc ... so... I think would be a good idea if
> we stay with the previous version of Matlab until we fix all the issues...
> at least to use EEGLAB.
> > Best,
> > Ramon
> >
> >
> >
> > On Thu, Oct 23, 2014 at 12:10 AM, Simon-Shlomo Poil <
> poil.simonshlomo at gmail.com> wrote:
> > Dear Martin,
> >
> > This is an issue associated with the new graphics structures in Matlab
> R2014b. You simply need to change line 126 to 'fig' '' [] 0;
> > instead of
> > 'fig' 'real' [] 0;
> >
> > and then at least the eeglab gui starts.
> >
> > Best wishes,
> >
> > --
> > Simon-Shlomo Poil, Dr.
> > LinkedIn profile: http://ch.linkedin.com/in/simonshlomopoil/
> >
> > The Neurophysiological Biomarker Toolbox (NBT): http://www.nbtwiki.net
> >
> > My latest publications:
> > Integrative EEG biomarkers predict progression to Alzheimer's disease at
> the MCI stage: http://l.nbtwiki.net/19jMuy8
> >
> > The Amsterdam Resting-State Questionnaire reveals multiple phenotypes of
> resting-state cognition: http://l.nbtwiki.net/17yblK7
> >
> >
> > 2014-10-22 17:45 GMT+02:00 Martin Dinov <m.dinov13 at imperial.ac.uk>:
> > Dear all,
> >
> > I recently upgraded my OS X machine to the latest 10.10 Yosemite
> > version. Now, with the latest (?) MATLAB (R2014b) and with
> > eeglab13_3_2b, calling "eeglab" in MATLAB does not successfully start
> > EEGLAB. I get the following error messages:
> >
> > >> eeglab
> > eeglab: options file is ~/eeg_options.m
> > Error using supergui (line 140)
> > supergui error: argument 'fig' must be numeric
> >
> > Error in eeglab>eeg_mainfig (line 1304)
> > supergui(gcf, geometry, [], listui{:});
> >
> > Error in eeglab (line 449)
> > javaobj = eeg_mainfig(onearg);
> >
> > Has anyone successfully gotten eeglab to run on this combination of OS X
> > and MATLAB versions?
> >
> > Kind regards,
> >
> > --
> > Martin Dinov, MSc
> > PhD postgraduate
> > Imperial College London
> > Computational, Cognitive and Clinical Neuroimaging Laboratory
> > 3rd Floor, Burlington Danes Building,
> > Hammersmith Hospital
> > Du Cane Road
> > London
> > W12 0NN
> >
> > _______________________________________________
> > Eeglablist page: http://sccn.ucsd.edu/eeglab/eeglabmail.html
> > To unsubscribe, send an empty email to
> eeglablist-unsubscribe at sccn.ucsd.edu
> > For digest mode, send an email with the subject "set digest mime" to
> eeglablist-request at sccn.ucsd.edu
> >
> >
> > _______________________________________________
> > Eeglablist page: http://sccn.ucsd.edu/eeglab/eeglabmail.html
> > To unsubscribe, send an empty email to
> eeglablist-unsubscribe at sccn.ucsd.edu
> > For digest mode, send an email with the subject "set digest mime" to
> eeglablist-request at sccn.ucsd.edu
> >
> >
> >
> > --
> > _____________________________________________________
> > Ramon Martinez-Cancino
> > Swartz Center for Computational Neuroscience
> > Institute for Neural Computation, University of California San Diego
> >
> >
> > _______________________________________________
> > Eeglablist page: http://sccn.ucsd.edu/eeglab/eeglabmail.html
> > To unsubscribe, send an empty email to
> eeglablist-unsubscribe at sccn.ucsd.edu
> > For digest mode, send an email with the subject "set digest mime" to
> eeglablist-request at sccn.ucsd.edu
> >
> >
> >
> > --
> > Best
> > Solveig L. Hauger
> > psychologist/PhD. candidate, Sunnaas rehabilitation hospital
> >
> > _______________________________________________
> > Eeglablist page: http://sccn.ucsd.edu/eeglab/eeglabmail.html
> > To unsubscribe, send an empty email to
> eeglablist-unsubscribe at sccn.ucsd.edu
> > For digest mode, send an email with the subject "set digest mime" to
> eeglablist-request at sccn.ucsd.edu
>
>
>
>
> ---------- Forwarded message ----------
> From: Martin Dinov <m.dinov13 at imperial.ac.uk>
> To: Simon-Shlomo Poil <poil.simonshlomo at gmail.com>
> Cc: "eeglablist at sccn.ucsd.edu" <eeglablist at sccn.ucsd.edu>
> Date: Thu, 23 Oct 2014 13:55:02 +0100
> Subject: Re: [Eeglablist] EEGLAB doesn't start on latest matlab and OS X
> Thanks Simon and Ramon
>
> The below does start eeglab but it then dies on many operations. I've
> gotten 2013b to run (using an official MathWorks patch) and EEGLAB seems to
> behave normally on it so I'll stick to 2013b for now.
>
> Thanks again,
> Martin
>
> On 10/22/14, 11:10 PM, Simon-Shlomo Poil wrote:
>
> Dear Martin,
>
> This is an issue associated with the new graphics structures in Matlab
> R2014b. You simply need to change line 126 to 'fig' '' [] 0;
> instead of
> 'fig' 'real' [] 0;
>
> and then at least the eeglab gui starts.
>
> Best wishes,
>
> --
> Simon-Shlomo Poil, Dr.
> LinkedIn profile: http://ch.linkedin.com/in/simonshlomopoil/
>
> The Neurophysiological Biomarker Toolbox (NBT): http://www.nbtwiki.net
>
> My latest publications:
> Integrative EEG biomarkers predict progression to Alzheimer's disease at
> the MCI stage: http://l.nbtwiki.net/19jMuy8
>
> The Amsterdam Resting-State Questionnaire reveals multiple phenotypes of
> resting-state cognition: http://l.nbtwiki.net/17yblK7
>
>
> 2014-10-22 17:45 GMT+02:00 Martin Dinov <m.dinov13 at imperial.ac.uk>:
>
>> Dear all,
>>
>> I recently upgraded my OS X machine to the latest 10.10 Yosemite
>> version. Now, with the latest (?) MATLAB (R2014b) and with
>> eeglab13_3_2b, calling "eeglab" in MATLAB does not successfully start
>> EEGLAB. I get the following error messages:
>>
>> >> eeglab
>> eeglab: options file is ~/eeg_options.m
>> Error using supergui (line 140)
>> supergui error: argument 'fig' must be numeric
>>
>> Error in eeglab>eeg_mainfig (line 1304)
>> supergui(gcf, geometry, [], listui{:});
>>
>> Error in eeglab (line 449)
>> javaobj = eeg_mainfig(onearg);
>>
>> Has anyone successfully gotten eeglab to run on this combination of OS X
>> and MATLAB versions?
>>
>> Kind regards,
>>
>> --
>> Martin Dinov, MSc
>> PhD postgraduate
>> Imperial College London
>> Computational, Cognitive and Clinical Neuroimaging Laboratory
>> 3rd Floor, Burlington Danes Building,
>> Hammersmith Hospital
>> Du Cane Road
>> London
>> W12 0NN
>>
>> _______________________________________________
>> Eeglablist page: http://sccn.ucsd.edu/eeglab/eeglabmail.html
>> To unsubscribe, send an empty email to
>> eeglablist-unsubscribe at sccn.ucsd.edu
>> For digest mode, send an email with the subject "set digest mime" to
>> eeglablist-request at sccn.ucsd.edu
>>
>
> _______________________________________________
> eeglablist mailing list eeglablist at sccn.ucsd.edu
> Eeglablist page: http://www.sccn.ucsd.edu/eeglab/eeglabmail.html
> To unsubscribe, send an empty email to eeglablist-unsub at sccn.ucsd.edu
> To switch to non-digest mode, send an empty email to
> eeglablist-nodigest at sccn.ucsd.edu
>
--
Nick Wan
Graduate Student
Utah State University Psychology Department
2810 Old Main Hill
Logan, UT 84322
Office: HSRC 004
Phone: 435-554-8788
Blog: truebra.in
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://sccn.ucsd.edu/pipermail/eeglablist/attachments/20141023/8b2ee9a4/attachment.html>
More information about the eeglablist
mailing list